Armasight Prometheus 336 3-12x50 60 Hz Thermal Imaging Monocular

SKU
TAT176MN4PROM31
This product is no longer available
Armasight about Prometheus Thermal Monocular
 
Armasight Prometheus is the latest and most technologically advanced thermal imaging monocular to enter the sporting, law enforcement, and military markets. The Prometheus product line is based on the latest FLIR Tau 2 VOx microbolometer core, and is available in a variety of models – each optimizing performance, price, and state-of-the-art technology for myriad uses and mission applications. The Prometheus is a solid state, uncooled, long-wave infrared, magnified, dedicated handheld thermal imager intended for day and night engagements. The 24/7 mission capability is only one of the strengths of Prometheus. The thermal imaging technology also allows you to detect targets by cutting through snow, dust, smoke, fog, haze, and other atmospheric obscurants. Unlike the use of laser targeting or near-infrared illumination to augment night vision equipment, the Prometheus thermal imager is extremely difficult to detect with other devices, as it emits no visible light or RF energy.
 
 
Night Vision Guys about Armasight Prometheus Thermal Monocular
 
If Armasight Zeus was any indicator, this new thermal monocular from Armasight will prove to be a great success.  One thing Armasight is doing differently than most other companies is that they are going after the best available technology.  These digital color thermal imagers are utilizing FLIR Tau 2 microbolometers which are so new that even FLIR monoculars do not use them yet.  Not only do all the Prometheus models come built for tactical applications, but they also deliver excellent ergonomics and design.  Menus are easy to use and practical capabilities of these units are fantastic.
 
 
Armasight has introduced 8 variations of the Prometheus Thermal Monocular with different resolution, magnification, and refresh rates.  This particular model (TAT176MN4PROM31) Prometheus 3 336-60 has 336x256 resolution with 60ZH refresh rate and 3x magnification.  
 
 
Note that Armasight offers a digital recorder which naively pairs with Prometheus monoculars to record and play back videos.
 
 
Prometheus 3 336-60 (TAT176MN4PROM31) ships standard with the following accessories:
  • AWReC (Advanced Wireless Remote Control) #94
  • Instruction Manual with Warranty Card
  • Lens Cap
  • Picatinny adapter for AWReC (Advanced Wireless Remote Control)
  • Soft carrying Case
  • Two Lithium Battery CR123A
  • Video Cable
Magnification (NTSC/PAL) 2.8x / 3.4x
Objective Lens Type Germanium
Type of Focal Plane Array FLIR Tau 2
Pixel Array Format 336x256
Pixel Size 17 μm
Color White Hot/ Black Hot/ Rainbow/ Various Color modes
Resolution 0.40mrad
Display Type AMOLED SVGA 060
Controls Direct
Field of View — ang. (X / Y) 7.8 / 5.9
Objective Focal Length 50mm
Objective F-number 1:1
Exit Pupil Diameter 10mm
Eye Relief 45mm
Focusing Range 5m to infinity
Power Supply 2x CR123A (3V)
Environmental Rating Waterproof
Operating Temperature -40 to +50°C (-40 to +122°F)
Battery Life at 20 °C (68 °F) 4 Hrs
Storage Temperature -50 to +70°C (-58 to +158°F)
Dimensions 255×70×70 /10x2.7x2.7 (mm/in)
Weight 0.55 / 1.2 (kg/lbs)
Warranty 3 Years

Armasight Prometheus 336 3-12x50 60 Hz Thermal Imaging Monocular

  • The lightest and most compact scope in its class
  • Easy and Intuitive Drop-down user interface
  • Digital E-Zoom: 1x, 2x, and 4x
  • Color Modes: White Hot/ Black Hot/ Rainbow/ Various Color modes
  • Extended operation time with optional external battery power supply
  • Recording: video output /optional Video Recorder with onboard replay
  • Tactical scenarios (CQB, etc.)
  • Waterproof, CNC machined aircraft-aluminum alloy construction
  • Rapid start-up
  • Made in USA
  • 3 Year Warranty / 10 Years on Thermal Core

Thermal Imaging

Please note that most thermal devices are built per order.  It may take 3-5 days or more for your order to ship.  If timely shipping is important to you, please, contact us to verify availability prior to ordering. 

Thermal devices can produce various types of images.  Some are color others are monochrome.  In either case change in shade or color indicates temperature differences.

color thermal image thermal bw image

Here is how thermal imaging devices work...

A special lens focuses the infrared light emitted by all of the objects in view.

The focused light is scanned by a phased array of infrared-detector elements. The detector elements create a very detailed temperature pattern called a thermogram. It only takes about one-thirtieth of a second for the detector array to obtain the temperature information to make the thermogram. This information is obtained from several thousand points in the field of view of the detector array.

The thermogram created by the detector elements is translated into electric impulses.

The impulses are sent to a signal-processing unit, a circuit board with a dedicated chip that translates the information from the elements into data for the display.

The signal-processing unit sends the information to the display, where it appears as various colors depending on the intensity of the infrared emission. The combination of all the impulses from all of the elements creates the image.

There are a few key Manufacturers when it comes to thermal imaging.  

ATN: produce such well knows devies as ThOR-HD thermal scope, BINOX-THD thermal binoculars, and OTS-HD thermal monocular.  

FLIR/Armasight: the largest maker of consumer level thermal products is well knows for their full product line.  Zeus thermal scopes, Q14 and Scout monoculars, Helios and Scout binoculars and many more.

Pulsar: a very popular brand for digital night vision and thermal imaging.  Key products include Pulsar Trail and Apex thermal scopes and Pulsar Helion and Quantum thermal monoculars.

Seek: mobile device mounted thermal cameras are the main products of this brand.

Delivery Time and Manufacturing Process for Armasight Prometheus 336 3-12x50 60 Hz Thermal Imaging Monocular:

Most of our manufacturers do not keep products like Armasight Prometheus 336 3-12x50 60 Hz Thermal Imaging Monocular assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:

  • Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
  • QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
  • Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
  • QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
  • Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
  • Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.

Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice.  It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.

footer image footer image
Currently there are no reviews for this product. Be the first to add a review
Write Your Own Review
Ask your own question
From Our Community

Loading, please wait...