ATN PS28-2 Night Vision Clipon Sight

SKU
NVDNPS2820
This product is no longer available

New for 2014, another great night vision device from ATN. ATN PS28-2 Night Vision Clipon Sight replaces the well acclaimed PS22 model.

 

New design and enhanced performance make this device even better.  With the supplied quick release mount, automatic brightness adjustment,  and low weight this night vision clipon delivers fantastic results.

 

Thanks to the many included adapters and optional scope mounting brackets, ATN PS28-2 can be matched up with practically any day time scope.  The way this works is that the ATN PS28-2 night vision clipon attaches in the from of the day time scope.  It can either attach on the rail or directly onto the scope by means of an option scope mounting bracket.  As a result, you never have to re-zero your day time scope.  The entire process takes seconds and you are ready to shoot at night thanks to the ATN PS28-2 night vision clipon.  

 

ATN PS28 Night Vision Clipon can be purchased with various night vision tubes ranging from a standard Gen 2 and all the way to Gen 4.  Though not ideal for that purpose PS28-2 can serve as a handheld monocular when you need to quickly survey the surroundings. 

 

If you are a hunter, law enforcement professional, farmer protecting their property or simply enjoy night time shooting, this device is ideal for you.  It works especially well on tactical rifles with weaver rails and matches up well with most day time scopes including Trijicon, Leupold, Nikon, Bushnell and others.

 

As always please feel free to contact us if you have any questions or if you found a better price on another site.  If such an unlikely even occurs, we will certainly match surpass any discount on ATN products and ATN PS28-2 night vision clipon in particular.

 

Another great use for ATN PS28-2 night vision clipon is on a photo camera or a spotting scope.  Once again, feel free to contact us for some creative night vision solutions..

 

ATN PS28 Night Vision Day/Night system ships with these accessories:

 

  • Instruction Manual
  • Lens Tissue
  • One Lithium Battery
  • Packing box
  • Warranty card
  • Mil-Spec Hard Case
  • IR450-B4
  • Quick Release Mount
  • Remote Control Unit
Total Darkness IR System Yes
IIT Generation 2+
Resolution 40-45 lp/mm
Signal to Noise Ratio 12-20
Figure of Merit <1250
MTTF - Mean Time Before Failure 5,000 hours
Magnification 1x
Lens System  
Proshield Lens Coating  
FOV  
Range of Focus  
Diopter Adjustment No
Controls Direct
Automatic Brightness Control Yes
Bright Light Cut-off Yes
Infrared Illuminator Detachable
IR Indicator No
Low Battery Indicator No
Power Supply 1 x 3V(CR123A)
Battery Life 60 hrs
Environmental Rating Waterproof
Operating Temperature -40°F to +122°F
-40°C to +50°C
Storage Temperature -58°F to +158°F
-50 to +70 °C
Dimensions  
Weight  
Warranty 2 years
  • No need to rezero your scope
  • Easily changes daytime scope to Night Vision
  • Waterproof
  • Lightweight and rugged
  • Fast catadioptric front lens system
  • Mounts in front of daytime scope, no re-zeroing required
  • Automatic Brightness Control
  • Resistance to severe conditions
  • Comes with Quick Release Mount

Gen 2 Night Vision

Please note that most high end night vision devices are built per order.  It may take 3-5 days or more for your order to ship.  If timely shipping is important to you, please, contact us to verify availability prior to ordering.

2nd generation is primarily used by law enforcement or for professional applications. This is because the cost of a 2nd Gen. unit is approximately $500.00 to $1000.00 more then a 1st Gen. The main difference between a 1st and a 2nd generation unit is the addition of a micro-channel plate, commonly referred to as a MCP. The MCP works as an electron amplifier and is placed directly behind the photocathode. The MCP consists of millions of short parallel glass tubes. When the electrons pass through these short tubes, thousands more electrons are released. This extra process allows 2nd generation units to amplify the light many more times then 1st generation giving you a brighter and sharper image. 2nd Gen. IIT standard 2nd generation tubes are high quality with exceptional brightness and resolution. Each tube has a micro channel plate, multi-alkaline photocathode with built-in power supply.

2nd Gen. IIT Features:

• Photo Cathode type: Multi-Alkali
• Resolution from 40 to 45 lp/mm
• Signal-to-Noise Ratio from 12 to 20
• 5,000+ hour tube life

Delivery Time and Manufacturing Process for ATN PS28-2 Night Vision Clipon Sight:

Most of our manufacturers do not keep products like ATN PS28-2 Night Vision Clipon Sight assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:

  • Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
  • QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
  • Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
  • QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
  • Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
  • Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.

Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice.  It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.

footer image footer image

5.0

Stars

1

Reviews

100%

Positive Reviews

+

Add your own review
Write Your Own Review
Ask your own question
From Our Community

Loading, please wait...