ATN Odin-32CW 2X 30Hz Thermal Monocular Sight Kit

SKU
TIWSOD32C
This product is no longer available
Please consider this similar product instead
Armasight Q14 640 30Hz Thermal Imaging Multipurpose Monocular

The ATN Odin Weapon Sight is specifically known for its incredibly small size while still being a very high quality thermal imaging device. The ATN Odin Sight Kit offers a 320 x 240 uncooled microbolometer and is MIL SPEC built to be identical to the AN/PVS-14. If you are already familiar with the PVS-14 design then you know it is a robust design that is very popular with military and law enforcement specialists.

 

The ATN Odin offers a resolution of 800 x 600 as well as an E-Zoom of 2x and 4x; the optical zoom is 2x, offering you the flexibility of an E-Zoom combined with a great resolution means zooming in is an easy process that still provides clarity of image, thanks to the ATN Odin’s 320 x 240 resolution this is easy and precise. The optical zoom of 2x means you can also truly close in on targets, without even needing the E-Zoom’s functionality.

 

The ATN Odin model that you are currently viewing is the ATN Odin-32CW 2x 30 hz thermal monocular - it offers an impressive 30 hz refresh rate and a 17 mm lens. Its microbolometer is VOx (Vanadium Oxide), and it offers a 15 x 11 degree field of view. This will give you impressive thermal imaging viewing in the field, making it easy to spot targets and comfortably run surveillance missions, knowing you are using some of the best technology on Earth.

 

If you are not already familiar with thermal imaging technology, the aspect that truly makes it superior to alternative night vision options is that it relies on heat waves instead of amplified light. Light can disappear and true dark situations can occur - this doesn’t matter to the thermal imaging user, because targets will still give off heat, thus providing you with heat wave patterns that make it easy to discern the situation.

 

The ATN Odin is built to be compact, lightweight, and remarkably easy to use. Thanks to its MIL SPEC build on the AN/PVS-14, you can trust that it is designed to serve you well in the field.

 

The ATN Odin ships with an operation manual, a lens tissue, a lithium battery, a warranty card, a lens cap, a demist shield, a hard case, and a J-Arm head mount adapter with a head strap.

 

The ATN Odin ships with a one year warranty. It has two hours of battery life.

As with all our Night Vision and Thermal Imaging devices, Night Vision Guys offers competitive pricing on the best devices. The high quality of these devices guarantees that they will meet your expectations and serve you well. Buying these units from NightVisionGuys.com guarantees quick handling as well as excellent service and price.

Sensor
(microbolometer)
320 x 240
Type Uncooled
Material Vanadium oxide (VOx)
Image Size
(output resolution)
800x600
Frame rate 30 Hz
Video output Analog RS-170
Lens 35 mm
Display Color OLED matrix,
SVGA< 800x600
Thermal Sensitivity <50mK
Spectral Response 7-14 μm
Field of View 15°x11°
Eye Relief 27 mm
Diopter Adjustment -6 to +4
Optical Magnification 2X
E-Zoom 4X, 8X
Human Detection 750 m
Human Recognition 300 m
Human Identification 180 m
Vehicle Detection 1650 m
Vehicle Recognition 660 m
Vehicle Identification 400 m
Reticle Multiple Reticles to Choose From
Polarity control White hot / Black hot /
Multiple Color Modes
Start up time <4 sec
Waterproof Waterproof / Dustproof
Battery type 1 x CR123A battery type
Battery Life 2+ hrs
Weight 0,77 lb /350 grams
Dimensions 3.40" x 2.20" x 1.95" /
87mm x 56mm x 50mm
  • Ergonomic Design
  • Compact and Lightweight
  • PVS-14 Construction
  • Mil. Spec Optics
  • Head Mountable
  • Weapon Interface
  • Variable Geometry Display
  • E-Zoom
  • Digital Brightness Control
  • Icon Based Menu System
  • Color Modes
  • Black/White Polarity/ Multiple Color Modes
  • VOx Vanadium Oxide Detector
  • 800x600 OLED Display
  • Video Output
  • Made in USA
  • One Year Warranty

Thermal Imaging

Please note that most thermal devices are built per order.  It may take 3-5 days or more for your order to ship.  If timely shipping is important to you, please, contact us to verify availability prior to ordering. 

Thermal devices can produce various types of images.  Some are color others are monochrome.  In either case change in shade or color indicates temperature differences.

color thermal image thermal bw image

Here is how thermal imaging devices work...

A special lens focuses the infrared light emitted by all of the objects in view.

The focused light is scanned by a phased array of infrared-detector elements. The detector elements create a very detailed temperature pattern called a thermogram. It only takes about one-thirtieth of a second for the detector array to obtain the temperature information to make the thermogram. This information is obtained from several thousand points in the field of view of the detector array.

The thermogram created by the detector elements is translated into electric impulses.

The impulses are sent to a signal-processing unit, a circuit board with a dedicated chip that translates the information from the elements into data for the display.

The signal-processing unit sends the information to the display, where it appears as various colors depending on the intensity of the infrared emission. The combination of all the impulses from all of the elements creates the image.

There are a few key Manufacturers when it comes to thermal imaging.  

ATN: produce such well knows devies as ThOR-HD thermal scope, BINOX-THD thermal binoculars, and OTS-HD thermal monocular.  

FLIR/Armasight: the largest maker of consumer level thermal products is well knows for their full product line.  Zeus thermal scopes, Q14 and Scout monoculars, Helios and Scout binoculars and many more.

Pulsar: a very popular brand for digital night vision and thermal imaging.  Key products include Pulsar Trail and Apex thermal scopes and Pulsar Helion and Quantum thermal monoculars.

Seek: mobile device mounted thermal cameras are the main products of this brand.

Delivery Time and Manufacturing Process for ATN Odin-32CW 2X 30Hz Thermal Monocular Sight Kit:

Most of our manufacturers do not keep products like ATN Odin-32CW 2X 30Hz Thermal Monocular Sight Kit assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:

  • Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
  • QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
  • Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
  • QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
  • Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
  • Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.

Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice.  It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.

footer image footer image
Currently there are no reviews for this product. Be the first to add a review
Write Your Own Review
Currently there are no Q&As for this product Be the first to ask a question

Loading, please wait...