Armasight by FLIR Apollo 336-60 Thermal Clip-on Sight

SKU
TAT256CN4APOL01
This product is no longer available

Armasight by FLIR Apollo 336-60 Thermal Clip-on Sight

The FLIR Apollo introduces thermal imaging to any standard daytime optic—no rezeroing needed. Fastened in front of a magnified sight via Picatinny quick-release mount, the Apollo brings state-of-the-art thermal technology to an existing set-up in seconds. Detect targets in complete darkness or through atmospheric obscurants without the need to remove daytime optics.

The time is now. Armasight has introduced an amazing new design in their Thermal Imaging Clip on devices, making it easy to take high quality thermal imaging technology with you when you are on the move. While these new Armasight thermal imaging scopes offer the same technological prowess of fully mounted scopes, they are so much simpler, easily mounting in front of your current day time scope. No longer do you have to release your daytime mount and spend valuable time switching it out for a night vision scope of some kind - now you can simply clip on the Armasight thermal imaging scope in front of your existing daytime scope for quick and ready night vision imaging.

 

If you are not yet sure if thermal imaging technology is for you, ask yourself one question, is it worthwhile to know you will be able to see your target, even in inclement weather conditions? If so, then the answer is easy. You must invest in thermal imaging technology, because in bad weather conditions other night vision technology definitely has the potential to let you down. Thermal imaging promises you an incredible and clear night time view of the field, but not just when the sky is clear. Even in rain and fog and other bad weather conditions, targets still give off heat, which means thermal imaging still works.

 

Another advantage of thermal imaging over other night vision technology is camouflage. A well selected camouflage outfit can hide a lot from even the well trained eye, but it can’t hide from thermal imaging technology. This is yet another way that a simple thermal imaging clip on scope upgrades your entire tactical arsenal; it is simple and very effective.

 

The model that you are currently looking at is the Armasight Apollo 336-60 which offers a refresh rate of 60 hz and a pixel array format of 336 x 256.

 

This model ships with the thermal imaging clip on system, an objective lens cap, an output lens cap, a mount, 2 CR 123A lithium batteries, an Advanced Wireless Remote Control, a Picatinny Adaptor for Wireless Remote Control, four different Light Suppressors included one for Day Scope, an operation and maintenance manual, a soft carrying case, a and hard shipping case.

As with all our Night Vision and Thermal Imaging devices, Night Vision Guys offers competitive pricing on the best devices. The high quality of these devices guarantees that they will meet your expectations and serve you well. Buying these units from NightVisionGuys.com guarantees quick handling as well as excellent service and price.

<td >Refresh Rate<td >60hz<td >Magnification<td >1x<td >Objective Lens Type<td >Germanium<td >Type of Focal Plane Array<td >FLIR Tau 2<td >Pixel Array Format<td >336×256<td >Pixel Size<td >25 μm<td >Resolution<td >mrad 0.6<td >Display Type<td >AMOLED SVGA 060<td >Pixel Display Format<td >800×600<td >Display Brightness<td >Discretely Adjustable to 8 Levels<td >Turn-on Time<td >max 3 sec<td >Temperature Imaging Modes<td >White Hot, Black Hot, Fusion, Rainbow, Globow, Ironbow 1,Ironbow 2, Sepia, Color 1, Color 2, Ice-Fire, Rain, and OEM Custom<td >Reticle Type<td >No Reticle<td >Analog Input/Output Format<td >PAL* / NTSC<td >Output Resolution (PAL / NTSC)<td >768×574 pixels / 640×480 pixels<td >Weapon Mount Type<td >Picatinny MIL STD 1913 and Weaver Rails<td >Overall Dimensions<td >217×70×80 mm (8.5”×2.8”×3.2“)<td >Height of the Apollo Axis above Rail<td >40 mm (1.57 in)<td >Weight (w/o Batteries)<td >0.7 kg (1.5 lbs)<td >Field of View (horizontal x vertical)<td >11° x 9°<td >Objective Focal Length<td >42 mm<td >Objective F-number<td >1:1<td >Eyepiece Focal Length<td >25 mm<td >Entrance Pupil Diameter<td >42 mm<td >Exit Pupil Diameter<td >25mm<td >Eye Relief<td >45-55 mm<td >Focus Method<td >Manual<td >Focusing Range<td >5 m to infinity <td >Battery<td >Two CR 123A (2×3V)<td >Current Consumption<td >maximum 350 mA<td >Battery Life at 20 °C (68 °F)<td >4h<td >External Power Supply<td >6 VDC/ 1 A<td >Operating Temperature<td >-40 to +50 °C (-40 to +122 °F)<td >Storage Temperature<td >-50 to +70 °C (-58 to +158 °F)<td >Recoil Resistance<td >700g<td >Immersion<td >10 m for 30 min

Armasight by FLIR Apollo 336-60 Thermal Clip-on Sight

The FLIR Apollo introduces thermal imaging to any standard daytime optic—no rezeroing needed. Fastened in front of a magnified sight via Picatinny quick-release mount, the Apollo brings state-of-the-art thermal technology to an existing set-up in seconds. Detect targets in complete darkness or through atmospheric obscurants without the need to remove daytime optics.

NO RE-ZEROING REQUIRED
  • Clip-on thermal sight relies on the day scope reticle, eliminating the need to rezero.
FAMILIAR PRECISION
  • Front-mounted thermal sight allows consistent shooting position and eye relief with an existing day scope.
ADVANCED IMAGING
  • FLIR Tau 2 thermal core, advanced image processing, and HD AMOLED SVGA display create a bright, sharp picture.

  • Simple and Quick conversion of daytime scope to Thermal Imaging
  • Mounts in front of any daytime scope, no re-zeroing required
  • High-resolution thermal imaging
  • Compact, lightweight, durable housing
  • True magnification
  • High-end OLED display
  • Video output
  • Quick Release Mount
  • Rapid start-up

Thermal Imaging

Please note that most thermal devices are built per order.  It may take 3-5 days or more for your order to ship.  If timely shipping is important to you, please, contact us to verify availability prior to ordering. 

Thermal devices can produce various types of images.  Some are color others are monochrome.  In either case change in shade or color indicates temperature differences.

color thermal image thermal bw image

Here is how thermal imaging devices work...

A special lens focuses the infrared light emitted by all of the objects in view.

The focused light is scanned by a phased array of infrared-detector elements. The detector elements create a very detailed temperature pattern called a thermogram. It only takes about one-thirtieth of a second for the detector array to obtain the temperature information to make the thermogram. This information is obtained from several thousand points in the field of view of the detector array.

The thermogram created by the detector elements is translated into electric impulses.

The impulses are sent to a signal-processing unit, a circuit board with a dedicated chip that translates the information from the elements into data for the display.

The signal-processing unit sends the information to the display, where it appears as various colors depending on the intensity of the infrared emission. The combination of all the impulses from all of the elements creates the image.

There are a few key Manufacturers when it comes to thermal imaging.  

ATN: produce such well knows devies as ThOR-HD thermal scope, BINOX-THD thermal binoculars, and OTS-HD thermal monocular.  

FLIR/Armasight: the largest maker of consumer level thermal products is well knows for their full product line.  Zeus thermal scopes, Q14 and Scout monoculars, Helios and Scout binoculars and many more.

Pulsar: a very popular brand for digital night vision and thermal imaging.  Key products include Pulsar Trail and Apex thermal scopes and Pulsar Helion and Quantum thermal monoculars.

Seek: mobile device mounted thermal cameras are the main products of this brand.

Delivery Time and Manufacturing Process for Armasight by FLIR Apollo 336-60 Thermal Clip-on Sight:

Most of our manufacturers do not keep products like Armasight by FLIR Apollo 336-60 Thermal Clip-on Sight assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:

  • Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
  • QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
  • Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
  • QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
  • Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
  • Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.

Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice.  It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.

footer image footer image

5.0

Stars

3

Reviews

100%

Positive Reviews

+

Add your own review
Write Your Own Review
Ask your own question
From Our Community

Loading, please wait...