Burris Optics 4-16x50 Eliminator III Laser Rangefinder Riflescope X96 Reticle and Fixed Switch

Model no: BUR-200116

Email for Availability

 

Not exportable outside of the USA. See Export Policy

$1,499.00
 

Not exportable outside of the USA. See Export Policy

Burris Optics 4-16x50 Eliminator III Laser Rangefinder/Riflescope X96 Reticle and Fixed Switch

  • X96 Illuminated Reticle, 2nd Focal Plane
  • Class 1 Eye-Safe IR Laser Rangefinder
  • Effective Range from 50-1200 yards
  • Ballistic Drop Compensation Computer
  • 1/8 MOA/Click Impact Point Correction
  • 40 MOA Windage/Elevation Adjustment
  • Capped Finger-Adjustable Turrets
  • Anodized 6061 T-6 Aluminum Housing
  • Index Matched Fully Multi-Coated Optics
  • Nitrogen-Filled, Water and Fogproof

Burris Optics 4-16x50 Eliminator III Laser Rangefinder Riflescope X96 Reticle and Fixed Switch description

Burris Optics 4-16x50 Eliminator III Laser Rangefinder/Riflescope X96 Reticle and Fixed Switch 

When every second counts the Burris Optics 4-16x50 Eliminator III Laser Rangefinder Riflescope eliminates the need to waste time switching between your rangefinder and rifle - just tap, adjust your aim, and pull the trigger. Optically, the Burris Optics 4-16x50 Eliminator is outfitted with a wide and versatile zoom range and an objective that has excellent low-light capabilities for accurate target identification at dawn and dusk, or under a heavy canopy. Index matched, multi-coated optics further boost the low-light abilities while also improving color rendition and contrast. 

The laser rangefinder rifle scope accurately ranges targets from 50 to 1200 yards, and is complemented with a built-in inclinometer that measures the upward or downward angle relative to the target. A bullet drop compensation system that uses the measured range, angle, and the user-inputted information on the cartridge in use, to activate and illuminate a adjusted aim point on the reticle. The Burris Optics laser rangefinder rifle scope can be programmed for hundreds of commercial loads or, if shooting custom rounds, users may choose a commercial load with specs most closely matching the custom rounds.

Designed to withstand the rigors of the wild, the housing is made of durable and lightweight 6061 T6 aluminum with a scratch and corrosion-resistant matte-black anodized finish. Its one-piece main-tube is nitrogen-filled and O-ring sealed to give it waterproof and fogproof performance. For a solid connection, the scope mounts on standard Picatinny/Weaver rail systems. This version of the Eliminator has ergonomically-placed activation switches on both sides of the housing directly behind the objective bell. This enables easy activation with a simple movement of the support hand.

Optical Performance
  • 4-16x zoom magnification
  • 50mm objective lens
  • Index-matched, Hi-Lume multi-coated optics
    • Increases light transmission
    • Improves color rendition and contrast
    • Reduces glare
  • 26-7' field of view at 100 yards
  • 3.5-4" eye relief
  • 12.5-3.1mm exit pupil
Rangefinder
  • Class 1 eye-safe IR laser
  • Effective range:
    • Deer: 50-750 yards
    • Reflective target: 50-1,200 yards
  • Ranging accuracy:
    • <100 yd: ±1 yd
    • 100-550 yd: ±2 yd
    • 550+ yd: ±3 yd
  • Measures distance in yards or meter
  • Runs on one included CR123A battery
X96 Reticle
  • Partially-illuminated
  • Five selectable brightness settings
  • Crosshairs with dots for windage and BDC adjustments
  • Illuminated dots automatically illuminated to show proper aiming point
  • Non-illuminated Windage offset dots further improves accuracy
  • Reticle placed on the rear (second) focal plane
  • Parallax-free out to 50 yards
Technologies
  • Built-in inclinometer
    • Measures upward or downward angle relative to target
    • Measures angles up to ±45°, relative
  • Ballistic compensation algorithm:
    • Uses range, angle and ammo to provide an adjusted range
    • Illuminates the appropriate BDC aiming point on reticle
    • Program ammo load for improved ballistic drop compensation calculation
    • Designed for use with centerfire rifles only
    • Programming saves in memory and is retained when changing batteries
  • Adjusts aiming point for magnification scope is set to
  • Displays an error if the range measured is further than the ammunition's maximum effective distance
Use and Handling
  • Turrets
    • Capped to prevent dirt and mud from entering mechanism
    • Caps also prevent accidental adjustments when moving through dense brush
    • Resettable to zero after initial sighting
  • 1/8 MOA per click shot compensation
  • ±20 MOA windage/elevation adjustment range
  • Adjustable objective parallax correction
  • In-view LED display shows adjusted aiming point, range, battery status, and windage hold-off
  • Activation
    • Dual buttons for left or right-hand shooter
    • Placed forward on scope for easy use with support hand without moving it too much
  • Reticle brightness and set-up buttons discreetly placed out of the way
Construction Details
  • Mount
    • Integrated 8.5" Picatinny/Weaver rail
    • No rings required
  • 6061 T-6 aluminum housing
  • One-piece main-tube
  • Scratch and corrosion-resistant matte-black anodized finish
  • Nitrogen-filled, water and fogproof
  • Double, internal-spring tension system holds zero through shock, recoil, and vibrations
  • Weight: 30.4 ounces, including mount and battery

Technical Specifications

Riflescope
Magnification 4-16x
Objective Lens Diameter 50 mm
Reticle X96 Duplex ranging
Rear (second) focal plane
Field of View 26.0 - 7.0' @ 100 yd / 8.6 - 2.3 m @ 100 m
Eye Relief 3.5 - 4.0"
Exit Pupil Diameter 12.5 - 3.1 mm
Impact Point Correction 1/8 MOA per click
Windage/Elevation Adjustment ±20 MOA
Parallax Correction Adjustable objective
50.0 yd / 45.7 m to infinity
Rangefinder
Laser Class 1 eye-safe IR
Metering Range 50.0 - 1200 yd / 46.0 - 1100 m
Accuracy <100 yd / 91 m: ±1 yd / 1 m
100 - 550 yd / 91 - 503 m: ±2 yd / 1.8 m
>550 yd / 503 m:±3 yd / 2.7 m
Battery 1 x CR123A battery
General
Mount Picatinny/Weaver rail
Construction 6061 T-6 aluminum
Weatherproofing Nitrogen-filled, water and fogproof
Operating Temperature 15 to 122°F / -10 to 50°C
Length 15.5" / 39.4 cm
Weight 30.4 oz / 861.8 g, including mount and battery
Packaging Info
Package Weight 3.5 lb
Box Dimensions (LxWxH) 20.236 x 4.724 x 4.095"

Questions on Burris Optics 4-16x50 Eliminator III Laser Rangefinder Riflescope X96 Reticle and Fixed Switch


From on

Q: Hi, do you have this item in stock? Thanks, Federico

A: Hi Frederico. We do not have it on-hand at the moment. Do you need it by a specific date?


From on

Q: Can you ship to Canada?

A: Hi Mark. Weapon mount scopes are not exportable to Canada without a special license. Only non weapons mounted optics are permitted.


From on

Q: Hi there , will this work good with a 30hz thermal clip on such as the berring c336 or a pulsar clip on?

A: Hi Rob. Burris Eliminator is a great scope and it should do well with any type of clip-on. You will probably need to figure out the most optimal settings for the units you end up pairing, but certainly should be a great setup either way. We would be more than happy to offer a package deal of some sort once you settle on specific models.


Ask Your Own Question

Your name will be displayed on site if the question is public
Your email will not be displayed on site even if the question is public
Write Your Own Review
You're reviewing:Burris Optics 4-16x50 Eliminator III Laser Rangefinder Riflescope X96 Reticle and Fixed Switch
Your Rating