Trijicon IR Patrol M300W-K Thermal Monocular Kit 640x480 19mm 60HZ 1x-8x
If you see a better price elsewhere please let us know and we will do our best to beat it.
Trijicon IR Patrol M300W Thermal Monocular 640x480 60HZ 19mm 1x-8x
Higher resolution shows more detail, so a state-of-the-art 640×480 sensor is used, and the fully digital RGB signal is passed to a 640×480 OLED display, maintaining a crisp 1:1 pixel ratio.
Thumb Stick System Controller
The IR PATROL comes standard with a fully ruggedized weatherproof multi-direction thumb stick controller. The large, easy-to-find-in-the-dark control surpasses the conventional buttons found on most other thermal imaging systems.
Built-In Mini Picatinny Rail
A mini picatinny rail is built into the IR PATROL housing, which facilitates a wide range of mounting options. Red, green, and even IR lasers can be mounted for hand-off capabilities. Or a white light can be mounted for a hands free flashlight. Add a mini reflex optic for day/night weapon sighting and CQB operations.
60Hz Frame Rate
You will be amazed by how the 60Hz frame rate makes helmet mounting work so well (M250 & M300W). A Wilcox adapter kit makes it easy to fit the system to most helmets for hands free operation, and with a dual bridge the thermal monocular can be paired with a NV monocular for a fusion system.
Afocal Magnifiers (Lens Multipliers)
2x and 3x afocal magnifiers double or triple the magnification of the standard 1x lens. The magnifiers provide and easy and cost effective way to get long range magnification, and by simply removing it, you’re at your wide angle. These are shock resistant AR coated germanium lenses with a DLC hard carbon coating.
Provides 2x, 4x, and 8x digital magnification. (Each increase reduces system resolution.)
DFC — Digital Focus Control
Softens or sharpens the image. Works with DCE (Digital Contrast Enhancement) for finer detail, more contrast, and greater depth are simply achieved with a toggle and press of the thumb stick. Non-Uniform Calibration or “NUC” can also be applied to improve image quality.
MaxPol Polarity Control
The IR PATROL comes with an easy to control polarity mode that lets you switch between three levels of White Hot and three levels of Black Hot. Other thermal systems offer just one level, which is often inadequate for the job. Having low, medium, and high levels provides you with an effective choice.
Edge Detect Tactical Mode
The IR PATROL M250 and M300W systems come with an Edge Detect mode that gives you an entirely new way to view your target. It operates at just a fraction of the brightness of other modes, so your eyes won’t be as susceptible to night blindness from the screen.
Image Capture & Video Download
Export what the IR PATROL sees to external computers and displays. (Not available with LE100. Image Capture only with LE100C.) For reliability and durability in harsh environments, Fischer high end connectors are used, rather than the low cost alternatives used in other scopes.
Trijicon IR Patrol M300W-K Thermal Monocular Kit 640x480 19mm 60HZ 1x-8x description
From Night Vision Guys about IR Patrol M300W-K Thermal Monocular IRMO-300K.
M300W is the top of the line IR Patrol thermal monocular. M300W adds such key features to the LE100C base as 60hz refresh rate, edge detection technology, video output,weapon mounting capability, and reticle feature. This monocular features 640x480 sensor with 60hz refresh rate. This model is meant as a tactical handheld thermal monoc based on BAE systems thermal core. It features great ergonomics and excellent software features. It also has a shoe interface making it possible to helmet mount the unit.
Overall we recommend M300W to professionals in the field who need a simple to use thermal monocular able to mount to both a helmet and a weapon. This versatility makes IR Patrol very useful. Keep in mind that the recoil rating max is .223/.556.
From the market about IR Patrol Thermal Monocular M300W
The IR Patrol Series thermal monoculars from IR Defense Corporation, is designed for military applications and performance at a consumer price. Utilizing MILSPEC BAE Systems 12 Micron Thermal Cores and eMagin OLED 10,000:1 Contrast VGA Displays, IR Patrol Monoculars feature some of the most advanced performance on the market today. Compact, Lightweight, and Rugged, IR Patrol Thermal Monoculars are ready for any mission from the battlefield to the hunting field.
IR Patrol Thermal Monoculars feature easy-to-use controls at the tip of the thumb. A large, recessed thumb stick provides users the ability to access all features and menus in the unit from a single spot. The thumb stick is extremely intuitive and easy to find with or without gloves. The recessed location helps to index the users’ thumb to the controller while keeping it protected from accidental actuation. All menus and features are easily navigated from this point. The housing is machined 6061 aircraft grade aluminum, providing incredible shock protection from field abuse.
Internally, IR Patrol Thermal Monoculars are incredibly advanced. Powered by the new BAE Systems MicroIR Thermal Core, the IR Patrol boasts incredible 12 Micron performance. This provides a 50% increase in magnification during digital zoom compared to most other cores. IR Defense uses a state of the art processor that operates on a true digital format, supplying RGB digital video to the display. Speaking of displays; IR Patrols present their video on eMagin VGA Digital 640×480 OLED Displays. This is a pixel-to-pixel match with the thermal sensor, producing a perfectly clear and sharp image to the user; no up-sizing or down-sizing to effect image quality.
The IR Patrol M300W is a Weapon-Mounted Thermal Monocular Scope. It is capable of being used as a standalone scope with internal digital reticle or in a clip-on capacity in front of low magnification weapon optics. It features 640×480 high resolution running at a 60hz frame rate. Polarity Swap with MaxPol Control, Digital Electronic Zoom, Brightness and DFC Digital Focus are standard. The M300W also features Edge Detect Mode, which darkens the image while outlining heat-producing objects for quick reference. This mode is valuable for retaining the user’s natural night vision because the display is not nearly as bright. Image capture and video out are standard on all M300W Models (download cable sold separately).
The versatile M300W is the top-of-line unit in the IR Patrol Series. It provides users with a robust thermal weapon scope recoil rated up to 300 Blackout. Its small size and light weight make for a handy thermal weapon platform. The crosshair reticle works can be used as ranging tool as it is roughly the height of a grown man at 100 yards. In clip-on mode, it can be used with low power optics and red dot sights. The M300W is designed to attach to weapons via the Wilcox Flip Mount Base. The Flip Mount Base is a precision-engineered and crafted part that tightly secures the scope inline with the bore, but can allow it to be flipped to the side using a force-to-overcome mechanism. This quick flip feature is ideal for clip-on capabilities. The shooter can use the IR Patrol M300W in front of an existing weapon optic. But, when faced with a target behind glass (through which thermal imagers cannot see), the shooter can quickly flip the M300W to the side and engage the target with the standard optic. This saves time because the M300W does not need to be removed when faced with various environmental factors.
Please note: The standard M300W comes with a dovetail shoe that is ready to clip into the Wilcox Flip Base. It requires the Wilcox Flip Base to attach to a weapon (available in the Tactical Kit). Without the Flip Base, it is a handheld monocular.
Please note that most thermal devices are built per order. It may take 3-5 days or more for your order to ship. If timely shipping is important to you, please, contact us to verify availability prior to ordering.
Thermal devices can produce various types of images. Some are color others are monochrome. In either case change in shade or color indicates temperature differences.
Here is how thermal imaging devices work...
A special lens focuses the infrared light emitted by all of the objects in view.
The focused light is scanned by a phased array of infrared-detector elements. The detector elements create a very detailed temperature pattern called a thermogram. It only takes about one-thirtieth of a second for the detector array to obtain the temperature information to make the thermogram. This information is obtained from several thousand points in the field of view of the detector array.
The thermogram created by the detector elements is translated into electric impulses.
The impulses are sent to a signal-processing unit, a circuit board with a dedicated chip that translates the information from the elements into data for the display.
The signal-processing unit sends the information to the display, where it appears as various colors depending on the intensity of the infrared emission. The combination of all the impulses from all of the elements creates the image.
There are a few key Manufacturers when it comes to thermal imaging.
ATN: produce such well knows devies as ThOR-HD thermal scope, BINOX-THD thermal binoculars, and OTS-HD thermal monocular.
FLIR/Armasight: the largest maker of consumer level thermal products is well knows for their full product line. Zeus thermal scopes, Q14 and Scout monoculars, Helios and Scout binoculars and many more.
Pulsar: a very popular brand for digital night vision and thermal imaging. Key products include Pulsar Trail and Apex thermal scopes and Pulsar Helion and Quantum thermal monoculars.
Seek: mobile device mounted thermal cameras are the main products of this brand.
Delivery Time and Manufacturing Process for Trijicon IR Patrol M300W-K Thermal Monocular Kit 640x480 19mm 60HZ 1x-8x:
Most of our manufacturers do not keep products like Trijicon IR Patrol M300W-K Thermal Monocular Kit 640x480 19mm 60HZ 1x-8x assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:
- Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
- QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
- Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
- QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
- Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
- Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.
Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice. It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.
IR PATROL Specifications
|Sensor Type||BAE MicroIR VOx Uncooled Microbolometer|
640x480 (actual 640x480) 307,200 pixels
|SpectralL Band||8 - 12 μm|
|Pixel Pitch||12 μm|
30HZ - IR PATROL LE100
|Calibration||NUC (Non Uniformity Correction)|
|IR Window||Germanium with Protective DLC Coating|
-6 / +4
Emagin OLED Monochrome Display
10 bit Digital Monochrome
60HZ / 30HZ Selectable
640x480 19mm - 1.x optical 8x digital
|Field of View||
640x480 19mm - 22° optical 3° digital
|Dimensions||5.95" L x 2.0" H x 2.95" W M100/M100C
5.95" L x 2.2" H x 2.95" W M250/M300W
|Start Up Time||>4 Seconds|
|User Interface||Thumb Stick Controller|
|Polarity||MaxPOL White Hot / Black Hot|
|Edge Detect||Edge Detection Mode|
|Electronic Zoom||Up to 8X Zoom Depending on System|
|Laser Rail||Built in Laser Interface Picatinny Rail|
|DFC - Digital Focus||Enhances and Sharpens Imagery|
|mage Capture||Image Capture special cable needed to download
LE100C / M250 / M300W Only
|Video Output||RS-170 NTSC Analog Video Special Cable required|
|DFC - Digital Focus||Enhances and Sharpens Imagery|
|Contrast||User Adjustable Contrast|
|ETR - Enhanced Target Recognition||Target Enhancment Software - M250/M300W Only|
|Image Capture||Image Capture special cable needed to download
LE100C / M250 / M300W Only
|Head Mountable||M250 / M300W Only|
|Weapon Mountable||M300W Only|
|Reticle System||Basic Crosshair and Clip-On Mode M300W Only|
Questions on Trijicon IR Patrol M300W-K Thermal Monocular Kit 640x480 19mm 60HZ 1x-8x
No questions asked yet