Knight Vision UNS-A2 Tactical Night Vision Clip-on Sight Gen 3 Pinnacle High Performance Tube

SKU
UNS-A2-HP-PLUS
$7,495.00
Add to Compare
0% APR for 6/12 months or interest bearing for 36 months*

Knight Vision UNS-A2 Tactical Night Vision Clip-on Sight Gen 3 Pinnacle High Performance Tubes

This UNS-A2 tactical clip-on sight uses the most from Gen 3 image tubes to increase light intensification of your scopes. UNS-A2 clip-on uses patented Knight Vision technology for advanced accuracy and boresight stability. This clip-on sight is best used when mounted in front of existing optics. Patented Single Interchangeable Battery (SIB)® allows use of either 123 or AA single batteries, with a battery life exceeding 24 hours

Knight Vision UNS-A2 Tactical Night Vision Clip-on includes:

  • Soft carry case
  • Operator's manual
  • Mount
  • Flip up Lens cap
  • Light Shroud
  • Picatinny Rail mount

 

GEN III MIL GRADE HP+
Power Supply: Pinnacle
Signal to Noise Ratio: 25.0 min.
Photocathode Response: 2200 min.
Electronic Background Input: 2.5 max.
Resolution: 64 lp/mm min.
Max Spots Allowed in Each Zone, Spot Size (in.) ZONE
1___2___3
...........>.012 - .015 0___0___0
...........>.009 - .012 0___0___0
...........>.006 - .009 0___0___1
...........>.003 - .006 0___0___2

 

 

 

Magnification

Unity

Operation Time

AA battery exceeds 24 hours, 123 battery exceeds 36 hours

Recognition Range

700 m (human, 1/4 moon)

Boresight 

Within .5 MOA

Waterproof

3 ft. for 4 hours

Finish

Flat Black Matte or Desert Sand Brown, Corrosion Resistant

Controls

Pull On/Off gain knob, Focus knob

Focus Range

15 Meters to Infinity

Power Source

1 AA-Size Battery

Weight

1.75 lbs. (.79 kg)

Size

6.2” (158 mm) long

Mount

KAC mount or quick attach / detach to MIL-STD-1913 rail or equivalent


Knight Vision UNS-A2 Tactical Night Vision Clip-on Sight Gen 3 Pinnacle High Performance Tubes

  • Clip-on Night Vision Scope
  • Magnification Up to 10X
  • Uses Single Interchange Battery SIB
  • Quick Attach/Detach

Gen 3P Night Vision

 Please note that most high end night vision devices are built per order.  It may take 3-5 days or more for your order to ship.  If timely shipping is important to you, please, contact us to verify availability prior to ordering.

Our Night Vision units with the 3P designation use ITT Pinnacle™ Image Intensifier tubes. The industry leading ITT Pinnacle™ image tubes utilize a gated power supply providing truly outstanding performance in high-light or light-polluted areas, such as urban environments. The Pinnacle™ tube with gated power supply minimizes any “halo” effects. “Halo” is often associated with using night vision devices in an urban area where random street lights are often an issue with early Generation Night Vision devices. Night Vision units with Pinnacle™ tubes have a resolution of 57-64lp/mm and a typical signal to noise ratio between 16.2 and 25 . All Night Vision devices utilizing Pinnacle™ Image Intensifier tubes come with ITT data record sheet. Units with Pinnacle™ tubes are not available for export. A signed export compliance and end use statement is required prior to shipping of these units.  As with all night vision tubes, each one coming off the production best has different parameters.  We can help you with picking the parameters which will fit your needs and the price of the device will depend on the quality of the tube you select.

3P Gen. ITT Pinnacle™ IIT Features:

• Photo Cathode type: Gallium Arsenide
• Resolution from 57 to 64 lp/mm
• Signal-to-Noise Ratio: 16.2-25 
• 10,000-hour tube life

* Pinnacle is a registered trademark of ITT Night Vision

Delivery Time and Manufacturing Process for Knight Vision UNS-A2 Tactical Night Vision Clip-on Sight Gen 3 Pinnacle High Performance Tube:

Most of our manufacturers do not keep products like Knight Vision UNS-A2 Tactical Night Vision Clip-on Sight Gen 3 Pinnacle High Performance Tube assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:

  • Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
  • QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
  • Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
  • QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
  • Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
  • Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.

Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice.  It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.

footer image footer image
Currently there are no reviews for this product. Be the first to add a review
Write Your Own Review
Currently there are no Q&As for this product Be the first to ask a question

Loading, please wait...