Close

CO-XLR-LRF Gen 3 Alpha MG Night Vision Extended Long Range Clipon

Delivery Details
Not Exportable outside of the USA
Download Documentation

CO-XLR-LRF Gen 3 Alpha MG Night Vision Extended Long Range Clipon NSCCOXLRF139DA1

Model no: NSCCOXLRF139DA1

Share with friends

List Price $7,695.00
Price
$6,995.00

Buy

CO-XLR-LRF Gen 3 Alpha MG Night Vision Extended Long Range Clipon



  • Simple and quick conversion of any day scope into a Night Vision Device

  • Mounts in front of riflescope with no re-zeroing required

  • Precise (1m resolution) Laser Range Finder capability

  • Equipped with wireless remote control

  • Variable gain control

  • Powered by a single alkaline 1.5V AA or 3V CR123A lithium battery

  • Low battery indicator

  • Quick-release mount

  • Bright light cut-off system

  • Mil standard compliant

  • Used with Advanced Modular Range-Finder

  • Limited two-year warranty


One may ask why Armasight needs another night vision clip-on in their line-up.  The answer is simple.  This new night vision clipon offers features which no other night vision clip-on on the market can provide.  Not only is CO-XLR-LRF the most capable night vision clipon in terms of range, it also is compatible with the laser range finder accessory manufactured by Armasight. This option makes CO-XLR-LRF a night vision device in a class of its own.


If you are looking for a true sniper level night vision clip-on, CO-XLR-LRF is the right choice.  This particular model is equipped with a hand picked Gen 3 tube and offers a superb value for the money.

CO-XLR-LRF Gen 3 Alpha MG Night Vision Extended Long Range Clipon Description



CO-XLR-LRF Gen 3 Alpha MG Night Vision Extended Long Range Clipon

With the introduction of the new Armasight CO-XLR LRF, we have pushed the boundaries of Night Vision systems further than they’ve ever gone. The Armasight CO-XLR LRF (Clip On – Extra Long- Range) is a night vision unit that mounts in front of any existing day scope, converting the scope into a night vision-capable device with a viewing range of up to 1,500 yards. Suitable for use with most commercial and military specification daytime scopes (up to 16X magnification), the CO-XLR LRF can be mounted/dismounted on any standard Picatinny rail in seconds, with no special tools required. Because the CO-XLR LRF can be mounted in front of your existing day scope, no rezeroing is required. The CO-XLR LRF allows the user to maintain consistent positioning and shooting accuracy, all while maintaining the use of a fully familiar day scope.

The Armasight CO-XLR LRF is intended for use by the most demanding hunter, long-range target shooter, and military or LE personnel. Its MIL-STD-810 housing is designed to withstand any environmental condition.

The CO-XLR LRF is packed with innovative features like variable gain control, bright light shut-off, and wireless remote control. This night vision clip-on is designed to make long-range night shooting just as easy and accurate as daytime shooting in the same terrain.

The Armasight CO-XLR LRF can be equipped with high-performance, Gen 2+ and Gen 3 variants image intensifier tubes, using either Green phosphor or Armasight’s “Quick Silver” and “Ghost” image intensifier tubes, which provide users with natural B&W images.

The Armasight CO-XLR LRF can be used with an Advanced Modular Range-Finder (AMRF2200). The AMRF2200 is designed to determine the exact distance between the observer and the target. The range-finder works with any NV Clip-On system that includes an LRF option. Measurements are displayed on the range-finder’s indicators and in the FOV of any connected NV device.

The AMRF2200 is a pulsed laser range-finder, which uses a laser beam to measure distance. This semiconductor laser emits a wavelength of 905 nm. The range-finder allows you to measure distances of objects between 5-2000 meters away. With a rugged, lightweight composite housing, it is waterproof and shock-resistant. An adjustable lever-cam clamping device ensures quick, easy, and reliable mounting and disassembly.

Package Contents:

  • Packing Box
  • Soft carrying Case
  • Battery
  • Battery adapter CR123A 3V / AA 1,5V
  • Lens Tissue
  • Instruction Manual with Warranty Card
  • Special Wrench
  • AWReC (Advanced Wireless Remote Control) #94
  • Picatinny adapter for AWReC (Advanced Wireless Remote Control)
  • Light-Suppressor
  • Adjustment-Control-Device
  • XLR-IR850 Detachable X-Long Range Infrared Illuminator

Gen 3A Night Vision

Please note that most high end night vision devices are built per order.  It may take 3-5 days or more for your order to ship.  If timely shipping is important to you, please, contact us to verify availability prior to ordering.

Gen 3 IIT

Our 3A Gen. Premium select IITs are the highest quality of our generation 3 IITs. These IITs are hand picked to provide the highest quality and specifications available in our 3rd Gen. line. They have a micro channel plate, GaAs photocathode, and a completely self-contained integral high-voltage power supply.

3A Gen. Premium select IIT Features:

• Photo Cathode type: Thin Film GaAs
• Resolution from 64 to 72 lp/mm
• Signal-to-Noise Ratio 26 Typical
• 10,000-hour tube life

Delivery Time and Manufacturing Process for CO-XLR-LRF Gen 3 Alpha MG Night Vision Extended Long Range Clipon:

Most of our manufacturers do not keep products like CO-XLR-LRF Gen 3 Alpha MG Night Vision Extended Long Range Clipon assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:

  • Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
  • QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
  • Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
  • QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
  • Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
  • Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.

Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice.  It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.

Technical Specifications

IIT Generation Gen 3 Alpha (High Performance) MG
Resolution 64-72 lp/mm
Magnification 1x (recommended to use with up to 16x day time optics)
Photocathode Type GaAs
Lens System F/1.8; 145 mm
Field of View
Focus Range 25m to Infinity
Exit Pupil Diameter 50 mm
Remote Control Wireless
Manual Gain Control Yes
Bright Light Cut-off Yes
Low Battery Indicator Yes (in FOV)
Infrared Illuminator XLR-IR850 Detachable Long-Range
Power Supply

CR123 Lithium 3V (1) or AA Alkaline 1.5V (1) or any AA or CR123

type rechargeable batteries with voltage from 1.2V to 3.7V (1)

Battery Life Up to 60 hours
Environmental Rating Waterproof
MIL-STD-810 Yes
Operating Temperature -40° to +50°С (-40° to 122°F)
Storage Temperature -50° to +70°С (-58° to 158°F)
Height of the Scope Axis above Rail 40 mm
Overall Dimensions 304 × 104 × 94 mm (12.0 × 4.0 × 3.7 in)
Weight (without Mount and Remote Control) 1.30 kg (2.86 lbs)
Warranty 2 Years
* All data subject to change without notice.  

Ask a question

Questions on CO-XLR-LRF Gen 3 Alpha MG Night Vision Extended Long Range Clipon

No questions asked yet

Close
Sign up for instant coupon code!

Sign up for our newsletter

Open Newsletter Popup
Close