Close

Night Vision Depot BNS-LR Night Vision Clip-on White Phosphor HP

Delivery Details
Not Exportable outside of the USA

Night Vision Depot BNS-LR Night Vision Clip-on White Phosphor HP NVD-BNS-LR-WPHP

Model no: NVD-BNS-LR-WPHP

Share with friends

List Price $11,695.00
Price
$11,695.00

Buy

Night Vision Depot BNS-LR Night Vision Clip-on - PVS27 - 10 Year Warranty


This a long range night vision clipon device. BNS-LR can be mounted in front of a daytime scope with magnification range of 1 to 20x.  Utilizing PVS27 night vision clipon, allows you to retain the boresighted daytime optic in it's ideal position as well as enjoy the benefits of Gen 3 Pinnacle night vision without the limitation of a fixed magnification lens offered by most dedicated night vision scopes.  


Simply mount this amazing device in front of your scope and enjoy night time hunting same way yuo hunt during the day.  


All BNS-LR Clipons Include:


Soft Carry Case, AA Batteries (2), Operators Manual, Lens Paper, Weaver Rail Mount, Flip Up Lens Cap, and Light Shroud.

Night Vision Depot BNS-LR Night Vision Clip-on White Phosphor HP Description



From Night Vision Guys about NV Depot BNS-LR / PVS-27 model NVD-BNS-LR-WPHP

Many high end night vision manufacturers offer PVS27 type of night vision clipon.  Most of them offer ITT Pinnacle tubes, but none offer the wide range of options within the Gen 3 Pinnacle tube that Night Vision Depot offer.  Due to a direct access to ITT's inventory of night vision tubes, Night Vision Depot is able to offer a range of Exelis and Pinnacle tubes ranging from consumer level to Mil Spec.  This particular unit NVD-BNS-LR-WPHP is a Commercial configuration of BNS-LR with a White Phosphor tube of superb clarity.

Night Vision Depot Products are available with Gen 3 White Phosphor Image Intensifiers manufactured by ITT Exelis. Traditional image intensifier tubes use a P-43 phosphor screen output, resulting in the yellow-green that has become the signature view through most Gen 3 night vision systems.  White Phosphor tubes use a P-45 phosphor screen, which yields an alternate coloration closer to black and white imagery. This change in color has been reported to enhance overall object recognition while providing contrast sensitivity equivalent to or better than traditional green phosphor image tubes. These White Phosphor tubes are available for system upgrades and can be Hand-Select for higher performance. The White Phosphor NVD systems come with a TEN year warranty.

From Night Vision Depot about BNS-LR / PVS27 Night Vision Clip-on NVD-BNS-LR-WPHP.

NVD's Boresighted Night Sight - Long Range (BNS-LR) is an incredibly powerful night vision weaponsight with an impressive magnification. Big brother to the BNS, it can be mounted in front of any boresighted daytime scope with magnification ranging from one to twenty power.

The BNS-LR does not require any boresighting and once mounted the daysight provides the aiming point. The BNS-LR maintains boresight despite normal misalignments due to mount position errors and does not alter the sighting centerline (parallax is unchanged from dayscope). The BNS-LR also contains no beam splitter or folded optics to go out of alignment.

The PVS-27 is revolutionary when used with a high magnification fixed or variable power dayscope. The magnification is provided by the dayscope, which typically has much smaller optics than those associated with normal 4X or 6X night vision weaponsights. This means there is no loss in system gain or typical f/number loss associated with large optics. Variable magnification dayscopes can actually zoom in (up to 20X) and still retain the same gain with only a slight loss in resolution.

Optimized for medium and long-range sniper weapons including the SR-25/MK11, XM107, .338 Lapua, .308 M24, Chandler & 300 Win Mag. Effective on all weapons from carbines to .50 caliber semi-automatic and bolt action sniper rifles. The BNS-LR includes FLIR's proprietary Shock Mitigation System TM, allowing the unit to be used on weapons up to and including .50 caliber bolt-action rifles.

The NVD PVS-27/BNS-LR utilizes MIL SPEC parts and accessories and is built with a choice of Commercial, MIL GRADE or Mil Spec ITT/Exelis GEN III Pinnacle Auto Gated image intensifier tubes.

Gen 3P Night Vision

 Please note that most high end night vision devices are built per order.  It may take 3-5 days or more for your order to ship.  If timely shipping is important to you, please, contact us to verify availability prior to ordering.

Our Night Vision units with the 3P designation use ITT Pinnacle™ Image Intensifier tubes. The industry leading ITT Pinnacle™ image tubes utilize a gated power supply providing truly outstanding performance in high-light or light-polluted areas, such as urban environments. The Pinnacle™ tube with gated power supply minimizes any “halo” effects. “Halo” is often associated with using night vision devices in an urban area where random street lights are often an issue with early Generation Night Vision devices. Night Vision units with Pinnacle™ tubes have a resolution of 57-64lp/mm and a typical signal to noise ratio between 16.2 and 25 . All Night Vision devices utilizing Pinnacle™ Image Intensifier tubes come with ITT data record sheet. Units with Pinnacle™ tubes are not available for export. A signed export compliance and end use statement is required prior to shipping of these units.  As with all night vision tubes, each one coming off the production best has different parameters.  We can help you with picking the parameters which will fit your needs and the price of the device will depend on the quality of the tube you select.

3P Gen. ITT Pinnacle™ IIT Features:

• Photo Cathode type: Gallium Arsenide
• Resolution from 57 to 64 lp/mm
• Signal-to-Noise Ratio: 16.2-25 
• 10,000-hour tube life

* Pinnacle is a registered trademark of ITT Night Vision

Delivery Time and Manufacturing Process for Night Vision Depot BNS-LR Night Vision Clip-on White Phosphor HP:

Most of our manufacturers do not keep products like Night Vision Depot BNS-LR Night Vision Clip-on White Phosphor HP assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:

  • Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
  • QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
  • Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
  • QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
  • Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
  • Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.

Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice.  It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.

Technical Specifications

White Phosphor WPHP
Power Supply: Pinnacle
Signal to Noise Ratio: 25.0 min.
Photocathode Response 2200 min.
Electronic Background Input: 2.5 max.
Resolution: 64 lp/mm min.
Max Spots Allowed in Each Zone, Spot Size (in.) ZONE
  1___2___3
...........>.012 - .015 0___0___0
...........>.009 - .012 0___0___0
...........>.006 - .009 0___1___1
...........>.003 - .006 0___2___2

 

BNS-LR System Specifications
Field of View 10˚
Magnification one power (1X)
Operation Time 40 hours @ 70˚F
Boresight Accuracy within 1 MOA
Boresight Repeatability within 0.5 MOA
Boresight Adjustment None required
Boresight Retention Permanent
Dayscope Magnification 3 to 20 Power
Objective Lens Focal Length 92mm, f/1.0
Focus Range 15m to infinity
Power Source 2 AA-Size Batteries
Weight (w/o batteries) 50 oz
Size 8.7"L x 4.5"W x 3.75"H

Ask a question (1)

Questions on Night Vision Depot BNS-LR Night Vision Clip-on White Phosphor HP

Sort by Descending
  • From Ron at 7/24/17 5:13 PM

    • Q: I would like to get further information on differences between this model and the AN/PVS-30 LR in WP. I have a .338 Lapua with S&B 5-25X56 PMII.

    • A: Hi Ron.

      Would you like us to call you to discuss the two units or are you looking for an email write up of key differences?

    • Do you find this question helpful?  Yes   No

Close
Sign up for instant coupon code!

Sign up for our newsletter

Open Newsletter Popup
Close