Pulsar Quantum LD38S Thermal Imaging Scope

SKU
PL77312
This product is no longer available
Please consider this similar product instead
Pulsar Thermion XM50 5.5-22x 320x240 Thermal Imaging Scope

From Night Vision Guys about Pulsar LD38S Thermal Monocular PL77312

PL77312 is a new model for 2014. Pulsar is continuing to increase its presence in the thermal space.  This LD38S thermal imaging scope is going to target the pro-sumer space.  Though color capabilities are missing, the thermal core utilized is of very high quality and the set of features of this thermal monocular is very impressive.

Each Pulsar LD38S ships with these accessories:

  • Thermal Imaging Scope Quantum LD38S
  • Carrying case
  • User manual
  • Video cable
  • Hand strap
  • Automotive cigarette lighter adapter
  • Spare battery container
  • Cleaning cloth
  • Warranty card


From Pulsar about Pulsar LD38S Thermal Monocular PL77312

Calibration

The Quantum S suggests three calibration modes: silent manual mode (“M”), automatic (“A”) and semiautomatic (“H”). The “A” mode implies calibration without user participation (process initiation (actuation of the shutter) takes place automatically). In the “H” mode the user decides on his own if calibration is required based on the image quality. Button “Cal” is pressed in this mode. Manual calibration (“M”) is carried out by pressing the button when the lens cap is closed. The “M” mode is recommended for hunting due to silent operation.      

 

Operating modes

The Quantum S suggests three operating modes, each designed to deliver best possible image in specific viewing conditions. The modes are as follows: “City” (enhanced contrast), “Forest” (low contrast) and “Identification” (improved rendering of hot objects’ details).    

 

Quick start-up time

The Quantum imaging scopes feature short start-up time (5 - 7 seconds) from the push of a button to full operational status. This is one of the best results in its class.    

 

Long detection range

High resolution (384x288) microbolometer ensures detailed image and long detection range.  

 

Body

The body of fiberglass reinforced plastic is able to effectively withstand impact, moisture and dust which allows the units to be used in extreme conditions. The rubber armouring ensures secure grip of the unit.

 

Wide range of operating temperatures

Quantum imaging scopes are effective for the use in low temperatures (-25°C) thanks to the frost-resistant OLED display employed in the unit (image remains the same as when viewing at positive environment temperature).

 

Brightness and contrast control

The control wheel located next to the lens allows the user to setup brightness and contrast most appropriate for specific situation.  

 

Self-contained power supply

The Quantum is powered with four AA size (rechargeable) batteries. The batteries are stored in a container which is then placed in a battery compartment of the unit.      

 

Video output

All Quantum models are equipped with an analog video output to enable connection of external recording equipment or transmitting image to the display.

 

External power supply

Operation time of the unit can be significantly increased thanks to the use of external power supplies (for example, Pulsar EPS3/EPS5) that can be connected with a special jack. When used in frosty weather, the power supply can be stored under the clothes. 

Electronic components  
Frame Rate, Hz 9
Microbolometer resolution, pixels 384x288
Sensor renponse LWIR
Spectral Sencitivity, µm 7.7 to 13.2
Pixel Pitch, µm 25
Display type OLED display
Display Resolution, pix. 640x480
Display diagonal, inch 0.31
Video output PAL/ NTSC
Pin type of video input / output 3.5mm jack
Operation modes city, forest, identification
Defective pixel repair option, yes/no yes
Optical characteristics  
Magnification 2.1
Digital zoom, x 2
Lens diameter, mm 32
Lens focus, mm 38
Relative aperture, D/f' 1:1.2
Field of View,°, horizontal * vertical 14.4x10.8
Field of View, m@100m, horizontal*
vertical
25x19
Minimum focusing distance, m 2
Eye Relief, mm 20
Exit Pupil, mm 8
Diopter adjustment, dptr. ±5
Focusing type of distance internal
Range of Detection, m  
Range of detection, m /yd(object
(high*width = 1,7*0,5m)
950 / 1,039
Power Supply  
Power Supply, V 4 ÷ 6
Battery type 4xAA
Battery life, hour 4.5 ... 5.5
External Power Supply DC 8.4 ÷ 15
Physical & operational characteristics  
Lens Material germanium
Body Material glass-nylon composite
Tripod Mount, inch 2x 1/4
Type of mount for
additional accessories
weaver
Operating Temperature,°C / °F - 20 to 50 / -4 to 122
Degree of Protection
(acc. to IEC 60529)
IPX4
Calibration manual
automatic
semi-automatic
Length, mm 200
Width, mm 86
Height, mm 59
Weight (without batteries), oz 12.3
  • 2x digital zoom
  • 950m detection range
  • 9Hz refresh rate
  • Superior quality Germanium lens with internal focussing
  • Convenient controls - The controls are accessible, user-friendly and comprised of three buttons: The on/off button, the calibration button and the digital zoom activation/colour inversion (hot white and hot black) button.
  • Wide operating temperature range
  • Self contained power supply
footer image footer image
Currently there are no reviews for this product. Be the first to add a review
Write Your Own Review
Currently there are no Q&As for this product Be the first to ask a question

Loading, please wait...