AGM Taipan TM25-384 Thermal Imaging Monocular 12 Micron 384x288 (50 Hz) Package

SKU
3092451004TA21-package-2
This product is no longer available

AGM Taipan TM25-384 Thermal Imaging Monocular 12 Micron 384x288 (50 Hz) 

 

The Taipan handheld thermal imaging monocular is equipped with a 384×288 infrared detector and a 1280×960 LCOS display. It supports functions of observation, highest temperature target tracking, distance measurement, Wi-Fi hotspot, and so on. The high-sensitivity built-in thermal detector provides you with clear view even in total darkness. The monocular is mainly applied to scenarios such as patrolling, law enforcement, searching and rescuing, drug enforcement, anti-smuggling, criminal seizing, hiking, travel, and hunting, etc.

 

FUNCTIONS: 

Distance Measurement: The device realizes distance measurement function after marking the top and bottom of target, and input the target height.

Hot Spot Mark: The device detects and marks the hot spot of highest temperature. 

Mode Switch: Device supports pallet switch and distance measurement. 

Storage: Built-in memory module supports video recording/snapshot capturing.

Digital Zoom: Device supports 1×, 2×, 4×, and 8× digital zoom. 

Wi-Fi Hotspot:Device can capture snapshots, record videos, and set parameters via APP after being connected to your phone.

  • 384×288 resolution, 12 μm, high sensitivity detector/
  • Adaptive AGC, DDE, 3D DNR
  • 1280 × 960 resolution 0.4-inch LCOS display
  • Built-in rechargeable Lithium battery
  • More than 7.5 hours continuous running (with Wi-Fi hotspot function off)
  • Wi-Fi hotspot
  • Type-C interface
  • 5-Year warranty

AGM Taipan TM25-384 Thermal Imaging Monocular 12 Micron 384x288 (50 Hz) 

 

 

Interface USB Type-C
Pixel Interval
12 μm
Multi Language menu
Yes
Drop Test Height
1.5 m (4.9 feet)
Detector type
Vanadium Oxide Uncooled Focal Plane Arrays
Response Waveband
8μm to 14μm
FFC (Flat Field Correction)
Auto, Manual, External Correction
Highest Temperature Spot Tracking
Yes
Standby Mode
Yes
Refresh rate
50 Hz
Aperture
F1.0
Resolution
384×288
Detection Range
1180 m
NETD
Less than 35 mk (@25°C), F#=1.0
Lens (focal length)
25 mm
Power
5 VDC/2 A, 1.5 W
Field of view (H × X)
10.5° × 7.9° (H × V)
Digital zoom
2×, 4×, 8×
Monitor
1280×960, 0.4 inch, LCOS
Imaging palettes
Black Hot, White Hot, Red Hot, Fusion
Storage
Built-in memory module (8 GB)
Record Video
On-board video recording
Capture Snapshot
Yes
Battery Type
Built-in rechargeable Lithium battery
Wi-Fi
Yes
CVBS Output
Yes (via USB)
Battery Operating Time
More than 7.5 hours continuous running (with Wi-Fi hotspot function off)
Battery Capacity Display
Yes
Weight
310 g (0.68 lb)
Working Temperature/ Humidity
-20°C to 55°C (-4°F to 131°F)
Overall Dimensions
171 × 61 × 57 mm (6.73 × 2.4 × 2.2 in)
Protection Level
IP67

AGM Taipan TM25-384 Thermal Imaging Monocular 12 Micron 384x288 (50 Hz) 

 

The Taipan handheld observational thermal monocular is equipped with a 384×288 infrared detector and a 1280×960 LCOS display. It supports functions of observation, highest temperature target tracking, distance measurement, Wi-Fi hotspot, and so on. The high-sensitivity built-in thermal detector provides you with clear view even in total darkness. The monocular is mainly applied to scenarios such as patrolling, law enforcement, searching and rescuing, drug enforcement, anti-smuggling, criminal seizing, hiking, travel, and hunting, etc.

 

FUNCTIONS: 

Distance Measurement: The device realizes distance measurement function after marking the top and bottom of target, and input the target height.

Hot Spot Mark: The device detects and marks the hot spot of highest temperature. 

Mode Switch: Device supports pallet switch and distance measurement. 

Storage: Built-in memory module supports video recording/snapshot capturing.

Digital Zoom: Device supports 1×, 2×, 4×, and 8× digital zoom. 

Wi-Fi Hotspot:Device can capture snapshots, record videos, and set parameters via APP after being connected to your phone.

  • 384×288 resolution, 12 μm, high sensitivity detector/
  • Adaptive AGC, DDE, 3D DNR
  • 1280 × 960 resolution 0.4-inch LCOS display
  • Built-in rechargeable Lithium battery
  • More than 7.5 hours continuous running (with Wi-Fi hotspot function off)
  • Wi-Fi hotspot
  • Type-C interface
  • 5-Year warranty
Interface USB Type-C
Pixel Interval
12 μm
Multi Language menu
Yes
Drop Test Height
1.5 m (4.9 feet)
Detector type
Vanadium Oxide Uncooled Focal Plane Arrays
Response Waveband
8μm to 14μm
FFC (Flat Field Correction)
Auto, Manual, External Correction
Highest Temperature Spot Tracking
Yes
Standby Mode
Yes
Refresh rate
50 Hz
Aperture
F1.0
Resolution
384×288
Detection Range
1180 m
NETD
Less than 35 mk (@25°C), F#=1.0
Lens (focal length)
25 mm
Power
5 VDC/2 A, 1.5 W
Field of view (H × X)
10.5° × 7.9° (H × V)
Digital zoom
2×, 4×, 8×
Monitor
1280×960, 0.4 inch, LCOS
Imaging palettes
Black Hot, White Hot, Red Hot, Fusion
Storage
Built-in memory module (8 GB)
Record Video
On-board video recording
Capture Snapshot
Yes
Battery Type
Built-in rechargeable Lithium battery
Wi-Fi
Yes
CVBS Output
Yes (via USB)
Battery Operating Time
More than 7.5 hours continuous running (with Wi-Fi hotspot function off)
Battery Capacity Display
Yes
Weight
310 g (0.68 lb)
Working Temperature/ Humidity
-20°C to 55°C (-4°F to 131°F)
Overall Dimensions
171 × 61 × 57 mm (6.73 × 2.4 × 2.2 in)
Protection Level
IP67
footer image footer image
Currently there are no reviews for this product. Be the first to add a review
Write Your Own Review
Currently there are no Q&As for this product Be the first to ask a question

Loading, please wait...