Close

Armasight COMMAND-Pro 336 4-16x50 60Hz Thermal Imaging Bi-Ocular

This product is no longer available, please consider this similar product instead
Delivery Details
Not Exportable outside of the USA

Armasight COMMAND-Pro 336 4-16x50 60Hz Thermal Imaging Bi-Ocular TAT176BN5HPRO41

Model no: TAT176BN5HPRO41

Share with friends

Armasight COMMAND-Pro 336 4-16x50 60Hz Thermal Imaging Bi-Ocular



  • Active Contrast Enhancement (ACE) – a digital “Contrast” correction that allows for a smart scene optimization based on dynamic adjustments where a variety of contrast levels occur depending on relative scene temperature.

  • Second Generation Digital Detail Enhancement (DDE) – a “Sharpness” correction that is digitally enhances the picture to present clearer imagery, significantly improves edge sharpening and further reduces image noise.

  • Smart Scene Optimization (SSO) – a fine-tuning computational correction that significantly improves an overall visual acuity for targets that have thermal signatures similar to a surrounding background.

  • Information Based Histogram Equalization (IBHEQ) – a “Sky/Sea” enhancement – information based environment dependent algorithm that automatically adjusts camera gain and excludes pixels determined to not contain critical information, specifically helpful in scenes with lots of sky or water.

  • Linear Automatic Gain Control (Linear AGC) – a correction that used to automatically adjust the gain to an appropriate range, the weaker the image signal, the stronger the gain.

  • User Controlled Manual Non Uniformity Correction/Flat-Field Correction (UCMNUC/FFC). There is a mechanical shutter between the camera sensor and the lens. This shutter is used to perform a non-uniformity correction (NUC) also known as flat-field correction (FFC. During FFC, the shutter presents a uniform temperature source to each detector element in the array. While imaging the flat-field source, the camera updates the offset correction coefficients, resulting in a more uniform image after the process is complete. All Prometheus models allow for user to manually trigger or interrupt scheduled UCMNUC/FFC function.

  • Silent Shutterless NUC ™ (SSN) – In addition to user controlled manual NUC/FFC all Prometheus models employ a digital supplemental non-mechanical flat-field correction that allows to extend the periods between mechanical shutter events and to further reduce image noise. SSN is always ON enhancement.


Key Features of Armasight COMMAND Pro Thermal Bi-Ocular Device



  • 24/7 Operation in presence of environmental obscurants (smoke, dust, haze, fog)

  • Rugged MIL-STD-810 compliant performance

  • Water and Fog-Resistant

  • Operates on 123A or AA batteries

  • Objective Germanium Lens Options

  • TAU-2 17μm Pitch Thermal Sensor

  • SVGA 800x600 OLED Display

  • Digital Compass

  • Digital Inclinometer

  • Battery Status Indicator

  • Selectable Palettes: White Hot/ Black Hot/ Sepia/ OEM Custom/ Other Color Variants

  • User-adjustable Image Enhancement Tools

  • Wireless 5-button Remote

  • Tracking Digital e-Zoom: 2x / 4x / 8x (640x512 only)

  • Still Picture and Video Recording Capability (Mounted DVR Option)

  • Made In The USA

Armasight COMMAND-Pro 336 4-16x50 60Hz Thermal Imaging Bi-Ocular Description



Armasight COMMAND-Pro 336 4-16x50 60Hz Thermal Imaging Bi-Ocular

The COMMAND Pro high performance handheld magnified thermal bi-ocular take full advantage of the technology and advancements that Armasight has developed for its uncooled thermal weapon sight programs. Due to design concepts emphasizing shared sub-assemblies, the COMMAND Pro handheld thermal bi-ocular exhibits the same standard performance as the Zeus Pro and Apollo Pro.The COMMAND Pro can withstand the most brutal environmental shocks typically associated with heavy caliber shooting. Based around a common cores of electronics, signal processing, and lens interfaces, a version of the COMMAND Pro can be ordered to meet virtually any requirement for an affordable uncooled magnified thermal bi-ocular.

Utilizing the latest FLIR TAU-2 Technology, the COMMAND Pro is offered in 640x512 pixel format with professional military-grade 50mm Germanium (Ge) objective lens. Armasight has introduced a unique dual battery option for the COMMAND Pro Thermal Bi-ocular consisting either of four 3.0VDC 123A batteries all oriented in the same direction to prevent confusion in replacement, or four 1.5VDC AA batteries pre-loaded in a cartridge. In a pinch, a single 123A 3.0VDC battery can power the Zeus Pro for just over one hour.

The COMMAND Pro Thermal Imager is characterized by its simple and intuitive controls, functions, and features that are layered among direct button adjustments, direct combination button functions, and electronic menu selections. Armasight has included all of the key bells and whistles found in the Zeus and Apollo Pro series devices including electronic compass and inclinometer. The COMMAND Pro uses a 9-pin multi-pin connector to provide video-in imagery, where there may be a need for map or rangefinder display overlays, and external power access. In support of these capabilities, Armasight offers an optional laser range-finder, external battery pack, multispectral laser and other accessories designed to attach on the MIL-STD-1913 rail of the COMMAND Pro. The COMMAND Pro has Bluetooth© wireless capability and can directly interface with most smart phones with the potential for engaging a series of current and future applications.

The COMMAND Pro is the ideal tool for scouting and target detection where the ambient environment is oriented for concealment. The COMMAND Pro is also an extremely useful tool for viewing scenes through environmental obscurants such as smoke, haze, fog, or dust. The COMMAND Pro marks the pinnacle of Armasight’s handheld uncooled thermal imaging family of products.

Armasight COMMAND-Pro 336 4-16x50 60Hz Thermal Imaging Bi-Ocular Included Accessories

  • Video Cable
  • Battery Cartridge (for AA batteries)
  • Battery Box Extender Ring (for AA batteries)
  • Armasight Key (used to remove the battery cap insert)
  • Packing Box
  • AWReC (Advanced Wireless Remote Control 5-buttons)
  • Battery Set
  • Lens Tissue
  • Soft carrying Case
  • Instruction Manual with Warranty Card
  • Picatinny adapter for AWReC (Advanced Wireless Remote Control)

Thermal Imaging

Please note that most thermal devices are built per order.  It may take 3-5 days or more for your order to ship.  If timely shipping is important to you, please, contact us to verify availability prior to ordering. 

Thermal devices can produce various types of images.  Some are color others are monochrome.  In either case change in shade or color indicates temperature differences.

color thermal image thermal bw image

Here is how thermal imaging devices work...

A special lens focuses the infrared light emitted by all of the objects in view.

The focused light is scanned by a phased array of infrared-detector elements. The detector elements create a very detailed temperature pattern called a thermogram. It only takes about one-thirtieth of a second for the detector array to obtain the temperature information to make the thermogram. This information is obtained from several thousand points in the field of view of the detector array.

The thermogram created by the detector elements is translated into electric impulses.

The impulses are sent to a signal-processing unit, a circuit board with a dedicated chip that translates the information from the elements into data for the display.

The signal-processing unit sends the information to the display, where it appears as various colors depending on the intensity of the infrared emission. The combination of all the impulses from all of the elements creates the image.

There are a few key Manufacturers when it comes to thermal imaging.  

ATN: produce such well knows devies as ThOR-HD thermal scope, BINOX-THD thermal binoculars, and OTS-HD thermal monocular.  

FLIR/Armasight: the largest maker of consumer level thermal products is well knows for their full product line.  Zeus thermal scopes, Q14 and Scout monoculars, Helios and Scout binoculars and many more.

Pulsar: a very popular brand for digital night vision and thermal imaging.  Key products include Pulsar Trail and Apex thermal scopes and Pulsar Helion and Quantum thermal monoculars.

Seek: mobile device mounted thermal cameras are the main products of this brand.

Delivery Time and Manufacturing Process for Armasight COMMAND-Pro 336 4-16x50 60Hz Thermal Imaging Bi-Ocular:

Most of our manufacturers do not keep products like Armasight COMMAND-Pro 336 4-16x50 60Hz Thermal Imaging Bi-Ocular assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:

  • Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
  • QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
  • Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
  • QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
  • Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
  • Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.

Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice.  It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.

Technical Specifications

SYSTEM DATA:  
Refresh Rate 60 Hz
Magnification (NTSC/PAL) 3.3x / 4x
Objective Lens Type Germanium
Type of Focal Plane Array FLIR Tau 2
Pixel Array Format 336x256
Pixel Size 17 µm
Resolution 0,34 mRad (70 SOA)
Display Type AMOLED SVGA 060
Pixel Display Format 800x600
Display Brightness Discretely Adjustable to 8 Levels
Turn-on Time, max 3 sec
Digital Zoom 1x, 2x, and 4x
Digital Compass Yes
Digital Inclinometer Yes
Digital Angle Cosine Indicator Yes
Battery Status Indicator Yes
Image Palettes White Hot, Black Hot, Sepia, Fusion, Rainbow, and Rain
Analog Input and Output Format (resolution) PAL (768×574 pixels)/ NTSC (640×480 pixels)
Video Recording Optional Digital Video Recorder with SD card slot
Remote Control Wireless 5-button
SPECIAL USER-ADJUSTABLE IMAGING TOOLS:  
Active Contrast Enhancement (ACE) - “CONTRAST” Yes
Second Generation Digital Detail Enhancement (DDE) – “SHARPNESS” Yes
Smart Scene Optimization (SSO) – “SMART SCENE” Yes
Linear Automatic Gain Control - “LINEAR AGC" Yes
Information-Based Histogram Equalization (IBHEQ) – “SKY/SEA” Yes
User-Controlled Manual Non-Uniformity Correction/ Flat-Field Correction (UCMNUC/ FFC) Yes
Silent Shutterless NUC ™ (SSN) Yes
OPTICAL DATA:  
Objective Focal Length 50 mm
Objective F-number 1:1.4
Field of View (ang.) 6.5° х 5°
Exit Pupil Diameter 14 mm
Eye Relief 16 mm
Focus Method Manual
Focusing Range 5m to inf.
Diopter Adjustment Manual
Diopter Adjustment Range ±5 diopter
ELECTRICAL DATA:  
Battery Four CR123A 3V Lithium batteries or four AA 1.5V
Battery Life at 20 °C (68 °F) up to 7 hr (optional up to 14 hrs)
Extended Battery Pack (optional) Two 18650 rechargeable batteries (3.7V) or four CR123 type rechargeable batteries with voltage 3.7V max or four standard CR123A 3V Lithium batteries (operational time up to 7 hr)
External Power Supply 6 VDC/ 600mА
ENVIRONMENTAL DATA:  
Operating Temperature -51° to +57°C (-59° to +134°F)
Storage Temperature -57° to +85°C (-70° to +185°F)
Recoil Resistance 0.50 BMG weapon shock and recoil
Environmental Rating Water and Fog-Resistant
MIL-STD-810 Compatibility Yes
MECHANICAL DATA:  
Overall Dimensions 241 x 102 x 60 mm (9.5 x 4.0 x 2.4 in)
Weight (w/o Batteries) 1.05 kg (2.3 lbs)
WARRANTY DATA:  
Warranty 3 years
Warranty on FLIR detector 10 years

Ask a question

Questions on Armasight COMMAND-Pro 336 4-16x50 60Hz Thermal Imaging Bi-Ocular

No questions asked yet

Close
Sign up for instant coupon code!

Sign up for our newsletter

Open Newsletter Popup
Close